Italiano English Franšais Espa˝ol


Item 293 NEW - MULTI-MONTI Galvanised Screw ě10x100 - EX 13

Art. 293 - HECO MULTI-MONTI MMS-PLUS SS 650A TE SW  Galvanised Screw Ø10x100 - EX 13




New Multimonti with new thread increased, new tip with larger and more sharp suture, new smaller hex head with washer and reinforced underside. We recommend placing this anchor on good compact rock. To screw, use a 13 mm hex key.

This screw is recommended for use on rock routes (both climbing and mountaineering) where the rock is particularly soft or inconsistent, and in all cases where as well as the safety aspect, the financial and environmental impact is taken into consideration.

As with all Multi-Monti screws, it can be retrieved after use by simply unscrewing it, to be reused on a future project (with the exception of on granite).

This anchor is very strong and its placement is relatively simple and requires only limited experience.

Given the considerable length of the thread (100mm), the use of this anchor is strongly recommended when the supporting material is relatively soft or inconsistent.

In these circumstances this anchor (art.293) performs to its highest standard.


MULTI-MONTI anchors are produced and patented by the German company HECO SCHRAUBEN KG & Co.

It is an innovative self-threading screw system and is highly resistant and practical.

The first part of the Multi-Monti thread is characterised by thread serration / teeth, that, when screwed, the anchor cuts into the material and creates the space for the rest of the screw.

Unlike traditional screw anchors, the Multi-Monti system does not exert excess tension on the rock/concrete, reducing the risk of damage or breakage.

The Multi-Monti system also differs from traditional permanent mechanical or resin anchors in that it can be easily unscrewed and reused.

This procedure should not be employed more than three times on rock and only once on granite.

Multi-Monti anchors are very resistant and reliable. Below is the Multi-Monti range stocked by RAUMER, with the corresponding dimensions, strengths and product codes.



1) Drill into the supporting material (rock, concrete, solid bricks) with an appropriately sized bit (see table).

2) Clean the drill hole.

3) Screw in the anchor, fixing it to the chosen plate.


Technical Informations

HECO-MULTI-MONTI has the European Technical Approval ETA 15/0784

HECO-MULTI-MONTI has also been awarded a F120 fire-resistance rating for use on various materials such as concrete, limestone and solid bricks


WEIGHT 47,2 g

Reference categories for this product
[ caving ]
[ mountaineering ]
[ canyoning ]
[ climbing ]


Punta SDS PLUS ě8x100
Item 138*
SDS PLUS "Nemesis" Bit ě8x100 - Makita

53 g



See Detail ?