PRODUCTS > Stainless Steel Halting Chains, Ring and Chains Topanchors Systems

Item 174 - Belay group - 2 Full Time anchors + 1 chain + 1 ring + 1 car.

Belay group in stainless steel – 2 Full Time anchors + 1 chain + 1 ring + 1 carabiner

Weight: 650 g

Entirely stainless steel belay group with the following specifications:
1.   Fixing method using a hammer. Two FULL TIME anchors (art.128) ensures fast, resistant and secure fixing.
2.   The connecting chain consists of two long parallel rings in steel wire with a diameter of 6 mm (L=120+120 mm) linked between the two fixed points. This type of chain, from our design, gives the possibility of bypassing the abseiling anchor, positioning and fixing the anchor at the end of the chain either on the right or on the left of the abseiling anchor. Practically it redoubles the possibility of finding the anchor favourable, and this is a great advantage.
The morphology of this chain allows easier carabiner attachment on maillons, even of more than one individual.
1.   The high resistant abseiling carabiner (art.165) (>40 kN!) also offers optimal duration performance, being manufactured in steel wire with a 12 mm diameter, therefore, very resistant under usage.

Ra = 30 kN                            Ra = 22 kN